INNOVET Specialist HF

We offer a complete range of x-ray systems.  Our most sophisticated veterinary x-ray system is presently the Synergy HI FREQ control coupled with a special veterinary 4 way float top table (76" long).  We have installed several of these systems throughout the Pacific Northwest US and are pleased to offer you several references.   In some cases we can upgrade your present system with new HI FREQ controls and tube and bring your older system up to new radiographic standards.   Room size considerations come into play, so be sure to contact us with your needs.  We can put together a system with a flat vet table (non float top) that will fit into a smaller area.   A typical room layout for the float top version is shown below.

This is the ideal system for a specialty or radiology practice.  It includes a 4 way float top table and separate floor to wall or floor to ceiling tubestand as desired.   Column rotation is an option.  Also included is Summit's certified collimator.   We have some of best known surgical referral centers in the Northwest as well as Emergency Clinics using the Deluxe HF Vet system.  We would be pleased to provide you with specific references should you desire.

POWER REQUIREMENTS:    The INNOVET Specialist requires 70 amps of 232 volts or greater, single phase power from a 37 KVA distribution transformer.  If you only have 207 single phase voltage (low line off of a 3 phase system...not uncommon in many commercial buildings) available you will need to order an optional voltage step up transformer to boost the incoming voltage to 232 or higher.  This optional transformer is approximately $220.00 and should be ordered with the x-ray.  It is considerably less than what your electrician would generally charge to supply you with the required voltage level.  Contact our office for complete electrical details.

Last Updated 05/23/08

Copyright 1999