Innovet – Specialist High Frequency

The InnoVet Specialist system recognizes the variety of needs that large busy practices or a specialty practice might have.  By utilizing Summit’s vast line of human medical systems, any possible needs can be satisfied including:

  • Tables with large 30″ x 76″ floating tops.
  • Tables that can support a 650 lb. animal.
  • Tables that can be raised and lowered by an electric motor.
  • Tubestands that have several axis of motion for that difficult orthopedic procedure.
  • Tubestands that ceiling mount to free more floor space.
  • Generators that deliver 100% more penetrating power.


Specialist Specifications

High Frequency (HF) Generator
20 kHz High Frequency (HF) generator
30 kW rating
kVp range: 40 – 125, in 1 kV increments
mA range: 25 – 300 with 8 mA stations
mAs range: 0.1 – 420 mAs with over 100 mAs selections
Two-point technique selection (kVp, mAs)
Digital display of kVp
Digital display of mA and mAs
UL classified
Four-Way Float-Top Table S210V
Table top: 76 in. x 30 in.
Table height: 31.5 in.
Rugged welded base construction supports 400 lb. animal
Effortless table-top travel (+/- 5 in. transverse travel, +/-10 in. longitudinal travel)
Grid cabinet with electric lock, 20 in. travel
Tubestand to grid cabinet interlock
Grid: 10:1 ratio, 103 LPI
Heavy-duty cassette tray
Tie-down side rails
Foot-operated electric table-top locks
Tubestand S105
Floor-to-wall or floor-to-ceiling tubestand with 5 ft. rails
Full range of vertical travel (floor to 40” SID above table top)
Electric locks
Angulation dial and operator handgrips
Angulating tubemount
X-Ray Tube C458
1.0 – 2.0 mm F.S., 140,000 heat units
Cables C600-15
15 ft. high voltage cables with federal terminations
Collimator D800
Certified manual collimator with light field
Swivel mount
Exposure Switch A981
Foot switch with 20 ft. cord
Generator Options
30 kW HF Generator
Power module inside table base
Step-up transformer for 1 phase line voltages measuring 200 – 229 VAC L246
Anatomical programmed console, tube-mounted
500 mA generator upgrade including step-up transformer
(Eight mA stations: 50s, 100s, 200L, 300L, 400L, 450L, 500L)
500 mA and anatomical programmed console together
40 kW HF Generator
Anatomical programmed console, power module not inside table base,
mA range: 50 – 500, operates from 3 phase 240 VAC nominal electric service
Line match transformer for 3 phase
line voltages measuring 208 – 229 VAC or 380 – 480 VAC 03902
Wall mounted, remote hand operated exposure switch W413 in lieu of foot switch
Wall mounted, remote hand operated exposure switch W413 in addition to foot switch
Pedestal mount L310 for operator console
Wall mount L311 for operator console
Table Options
Upgrade to variable height elevator table S211V
Tubestand / Tube / Cable Options
Extended tubestand rails (8 ft.) with 6-1/2 ft. travel for off-table exams includes extended length high voltage cables (20 ft.)
Upgrade tube to 0.6 – 1.2 mm F.S., 300,000 heat units, 01382
Upgrade tube to 0.6 – 1.5 mm F.S., 200,000 heat units, E411