Sedecal offers a relatively low priced R & F setup for veterinarians.  Factory engineer Devin Moser is reviewing the initial setup on this installation.  Sedecal can be further viewed at http://www.medlinkimaging.com    Anatomical programming on the handlebar assembly is standard with Sedecal.

Model S1SVFL-32  Includes a 40KW hf generator, 10 to 500ma and up to 125 kVp, anatomical programming, a 4 way float top table, with 103 line 8:1 grid and fractional focal spot tube (.6, 1.5mm focal spots).  Foot pedals for both the radiographic and fluro side are included.

Fluoro specifications:  9" Image intensifier, 4.5, 6 & 9" view fields, auto brightness CCD Camera, Last Image Hold, fluoro monitor with mobile cart and a footswitch complete the assembly.

To use the fluro mode, simply remove the tray from the grid cabinet.

Sedecal Premium Veterinary Systems

Similar to the above system but without Fluoro and with a standard 1mm, 2mm fs tube.   This model features a floor mounted tubestand that travels behind the table.   Various power generators are available.  All are high frequency.  Sedecal offers a special energy storage version that plugs into a standard wall outlet (115 VAC).   Anatomical programming is standard on all Sedecal generators.

Sedecal Standard Veterinary Systems

Available with either a 4 way float top table, or a mobile table.  The tubestand offers vertical travel but does not travel horizontally.  A more basic version is available without the vertical travel.

Last updated: 9/28/07

Last Updated 05/23/08

Copyright 1999